Setting of sadump environment
TABLE 6.6 Displayed contents of the help display area for operation
Moves the cursor up or down
Note
Don’t operate [F2] key. [Esc] key is displayed on the screen but don’t operate it.
6.5 [Create a dump device] Menu
This is displayed when the [Create a dump device] menu is selected in the main menu.
Specify operation, creating dump device or selecting created dump device.
FIGURE 6.8 Dump device create menu
TABLE 6.7 Displayed contents of menu selection area
Select create mode of dump device.
Single： Create with single disk or single partition. To
set up for redundancy, select [Single] and then
configure multiple sadump devices.
Multiple: Create with multiple disks. Use this when
system memory is large and one disk is insufficient.
Go to dump device select menu
