MMB Web-UI (Web User Interface) Operations
Displays the partition to which the IOU belongs.
TABLE 1.69 [Partition Configuration] Window Buttons
Sets the name in the partition.
Displays the [Add Unit] window for incorporating the unit.
Displays the [Remove Unit] window for deleting the unit.
Displays the [Partition Home] window for setting the Home of Partition.
Returns to original status without setting the information.
Displays the [View Partition Configuration] where the config
uration information of
partition is displayed.
[Message]
This section describes the messages to be displayed on this window.
Unable to set Partition Name of Partition#%aa because this partition is under
maintenance.
Unable to set Home on Partition#%aa because this partition is under maintenance.
Only the alphanumeric character can be input to Partition Name area.
The partition is not defined.
For details on the messages displayed on the window, see PRIMEQUEST 2000 Series Message Reference
(C122-E178EN).
The operation method in the [Partition Configuration] window is described as follows.
[Set Partition Name] Button
The partition name is entered in each cell of [Partition Name], and when [Set Partition Name] button is
clicked, the name for each partition is set.
[Add SB/IOU to Partition] Window
When the partition is selected by using radio button of [Partition Configuration] window and when [Add Unit]
button is clicked, [Add SB/ IOU to Partition] window appears.
