MMB Web-UI (Web User Interface) Operations
1.1.11 Web-UI menus in maintenance mode (CE)
This section outlines the Web-UI menus that are available with the CE privileges in maintenance mode.
The maintenance mode column has the following items. For details on the maintenance mode, see 1.1.6
Web-UI menus in maintenance mode.
- Hot System: Hot System Maintenance (Target unit not included in a partition)
- Hot Partition: Hot Partition Maintenance (Target unit in a activated partition)
- Warm System: Warm System Maintenance (Target unit in a powered off partition)
- Cold System: Cold System Maintenance (All partitions powered off, breaker on), and Cold System
Maintenance (All partitions powered off, breaker off)
The meanings of abbreviations in the table are as follows:
RW: The account user can refer to and set information in the window.
RO: The account user can only refer to information in the window.
N/A: The account user cannot view the menu and submenu.
*1 The account user can operate partitions not in maintenance mode in this window.
*2 The account user can operate only partitions in maintenance mode in this window.
*3 The SB is neither a Home SB nor Reserved SB. Alternatively, the SB is the Home SB in the Power Off
status in a partition in the Standby status.
*4 The partition is in the Standby status.
TABLE 1.12 Web-UI menus in maintenance mode (CE)
Control
Configuration
suppressed
since the Free
unit may be a
replacement
to Partition
Partition
IOU from
Partition
Partition
Reserved SB
Configuration
