UEFI Menu Operations
6. To exit from the menu after saving the changes, select [Commit Changes and Exit] and then press [Enter]
key.
To exit from this menu without saving the changes, select [Discard Changes and Exit] and then press
[Enter] key.
[Set Legacy Floppy Drive Order]Menu
When multiple DVD/CD drive exists, the [Set Legacy DVD/CD‐ROM Drive Order] menu sets the priority
level of the startup device.
Window at the time of startup of [Set Legacy Floppy Drive Order] menu is as follows.
The information on floppy drive is displayed on the window. Or, when “Disable” is displayed in Floppy Drive #
N, the boot function of Floppy Drive #N is Disable is shown.
FIGURE 3.48 Display example of [Set Legacy Floppy Drive Order] menu
(1) Page information display
It is displayed as [Set Legacy Floppy Drive Order].
(2) Menu Selection
Selection menu shown in “TABLE 3.57 Display contents of menu selection” is displayed
TABLE 3.57 Display contents of menu selection
Floppy Drive #N
(N: 0, 1…)
Switchover to change the order of Floppy boot. When this item is
executed, pop-up window is displayed and the settings can be
changed. After this, changing method is described in detail in “■
Change in priority level (Set Legacy Floppy Drive Order)”.
Exit from this menu, after saving the set contents.
Exit from this menu, after cancelling the set contents.
