A SERVICE OF

logo

*
SURFACE PROPERTY
18.50
*
SURFACE PROPERTY: Define surface properties for cavity radiation.
This option is used to define surface properties for cavity radiation analysis. It must immediately precede the
*
EMISSIVITY option.
Product: ABAQUS/Standard
Type: Model data
Level: Model
References:
“Cavity radiation,” Section 32.1.1 of the ABAQUS Analysis User’s Manual
*
EMISSIVITY
Required parameter:
NAME
Set this parameter equalto a labelthat will be used to refer to the property name forcross-referencing
to the surface definitions for which properties are being defined. Only element-based surfaces can
be used.
There are no data lines associated with this option.
18.50–1
ABAQUS Version 6.1 Module:
ID:
Printed on: