A SERVICE OF

logo

*
MATRIX ASSEMBLE
13.7
*
MATRIX ASSEMBLE: Define stiffness or mass matrices for a part of the model.
This option can be used to identify a stiffness or a mass m atrix that will be assembled into the corresponding
global finite element matrix. This matrix must have been input previously by using the
*
MATRIX INPUT
option.
Product: ABAQUS/Standard
Type: Model data
Level: Model
References:
“Defining matrices,” Section 2.10.1 of the ABAQUS Analysis User’s Manual
*
MATRIX INPUT
At least one of the following parameters is required:
MASS
Set this parameter equal to the name of the m ass matrix.
STIFFNESS
Set this parameter equal to the name of the stiffness matrix.
There are no data lines associated with this option.
13.7–1
ABAQUS Version 6.1 Module:
ID:
Printed on: