A SERVICE OF

logo

Open as PDF
next previous
*
MOHR COU LOMB
2. Dilation angle, , at high confining pressure in the p– plane. Give the value in degrees.
3. Temperature.
4. First field variable.
5. Second field variable.
6. Etc.,uptofivefieldvariables.
Subsequent lines (only needed if the DEPENDENCIES parameter has a value greater than five):
1. Sixth field variable.
2. Etc., up to eight field variables per line.
Repeat this set of data lines as often as necessary to define the dependence of the mater ial parameters
on temperature and other predefined field variables.
13.16–2
ABAQUS Version 6.1 Module:
ID:
Printed on: