*
NODE OUTPUT
Optional parameter:
VARIABLE
Set VARIABLE=ALL to indicate that all nodal variables applicable to this procedure and m aterial
type should be written to the output database.
Set VARIABLE=PRESELECT to indicate that the default nodal output variables for the
current procedure type should be written to the output database. Additional output variables can
be requested on the data lines .
If this parameter is omitted, the nodal variables requested for output m ust be specified on the
data lines.
Data lines to request nodal output:
First line:
1. Specify the identify ing keys for the variables to be written to the output database. The
keys are defined in “ABAQUS/Standard output variable identifiers,” Section 4.2.1 of the
ABAQUS Analysis User’s Manual, and “ABAQUS/Explicit output variable identifiers,”
Section 4.2.2 of the ABAQUS Analysis User’s Manual.
Repeat this data line as often as necessary to define the noda l variables to be written to the output
database.
14.10–2
ABAQUS Version 6.1 Module:
ID:
Printed on:
