Filter
Top Products
Response: The Port Parameters Menu is displayed.
/S Display Port Status
Displays the Port Status Screen, which lists current conditions and parameters for all ports.
Normally, the Port Status Screen will not display Port Passwords; the Password column will read
either "defined" or "undefined", depending upon whether or not the password for each port has
been specified. When the Supervisor Mode is active, the /SP command offers the option to either
display or suppress Port Passwords. For more information on the Port Status Screen, please refer
to Section 6.1.
Availability: Supervisor / User
Format: /S[P] [Enter]
When the "P" option is included (e.g. /SP), the Port Status Screen will lists the password for
each port, if defined. (Supervisor Mode Only).
Response: Displays Port Status Screen
/SD Display Port Diagnostics
Provides more detailed information regarding the operational status of each port. Note that in
User Mode, this screen will only display parameters for the ports that are allowed by the Port
Password that was entered at log in. For More information on the Port Diagnostics Screen,
please refer to Section 6.2.
Availability: Supervisor / User
Format: /SD [Enter]
Response: Displays Port Diagnostics Screen
/SN Display Network Status
Displays the Network Status Screen, which lists current conditions and parameters for the
Network Port. For more information on the Network Status Screen, please refer to Section 6.3.
Availability: Supervisor Only
Format: /SN [Enter]
Response: Displays Network Status Screen
/T Reset Network Port
Resets the NIC card, and breaks the network connection to the unit. Note that when this
WTI CMS-16; Console Management Switch -- User's Guide
file:///C|/WEBPAGE/guides/cms/html/rev_b/Cmsguide.htm (55 of 59) [11/15/2000 10:52:03 AM]