Filter
Top Products
Switches.
Caution: When /I is invoked, the CMS will revert to the parameters
specified by the Option Switches. Command selected parameters will be lost.
Availability: Supervisor Only
Format: /I[/Y] [Enter]
Where /Y is a command option used to suppress the "Sure?" prompt.
Response:
Verbose: "Are You Sure (y/n)?", if Y, memory test and initialization begins.
Terse: 5, if Y, memory test and initialization begins.
/J Display Site ID
Displays the user-defined Site I.D. message.
Availability: Supervisor / User
Format: /J [Enter]
Response: Displays Site I.D. Message
/N Set Network Port Parameters
Displays a menu which is used to define communication parameters for the Network Port. Also
allows access to the IP Security function, which is used to restrict network access by
unauthorized IP addresses. For more information on selecting network parameters, please refer
to Section 5.5.4.
Availability: Supervisor Only
Format: /N [Enter]
Response: Displays Network Parameters Menu
/P Set RS232 Port Parameters
Displays a menu which allows the user to select options and parameters for the selected port.
Section 5.5.3 describes the procedure for defining port parameters.
Availability: Supervisor Only
Format: /P [x] [Enter]
Where x is the number or name of the port to be configured. If the port number or name is
not specified, the CMS will display the configuration menu for your resident port.
WTI CMS-16; Console Management Switch -- User's Guide
file:///C|/WEBPAGE/guides/cms/html/rev_b/Cmsguide.htm (54 of 59) [11/15/2000 10:52:03 AM]