Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
Page 2
NDA-24313, Issue 1
Wireless Specification in NEAX2400 IPX
The following figure shows zone setting.
Service Conditions
Below are some of the conditions for the use of the Built-in Wireless system (IPX).
1. Wireless system is not available in the Hotel system. (Will be available in the future.)
2. ACD/OAI services are not available with the Wireless system.
3. Series 7200 or later software is necessary for Wireless system operation.
4. SMDR equipment can be used for billing.
5. The following billing services are available in the Wireless system:
• SMDR for outgoing C.O. line
• SMDR for incoming C.O. line
• SMDR for outgoing Tie line
• SMDR for incoming Tie line
• SMDR for incoming DID
• SMDR for DIT
• SMDR for IC via ATT-CON
6. PS is not connected to the data terminal equipment. (Will be available in the future.)
7. Service Conditions for CCIS features are as follows:
a.) When a call is originated from or terminated to a PS via CCIS, the calling number sent to the
called station varies depending on the numbering plan as shown below.
• closed numbering network: telephone number (PS number)
• open numbering network: office code + telephone number (PS number)
b.) When a PS user has a call placed on hold, link re-connection is not performed.
ERN-1-2
ERN-1-3
ERN-1-1
ERN-2-2
ERN-2-3
ERN-2-1
ERN-1-4
ERN-1-5
ERN-1-6
ERN-2-4
ERN-2-5
ERN-2-6
PCN-1
PCN-2
Node 1 Node 2
Assign calling area over the node is not allowed.
When the FCCS network is established, inter-node
Hand-Over is available within an identical PCN.