Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
Page 58
NDA-24313, Issue 1
C-161 Call Forwarding - Dropped Calls
Service Conditions (cont’d)
5. When a call is currently being transferred by this feature, the forwarded party (not the forwarding
destination but the party first connected to the Squelch PS) hears the Ringback Tone.
6. When this feature has been activated during a two-way call between a PS and a station (including PS), the
station now being transferred to the forwarding destination, cannot use “TRF” or “HLD” keys (restriction
is imposed).
7. This feature can be applied to:
• a basic two-way connection between a PS and a station (including PS)
• a basic two-way connection between a PS and a trunk (analog, ISDN, CCIS, TLT)
8. When forwarding destination of this feature can be:
•a PS
• an analog/D
term
station
• an Attendant
• a trunk (COT)
•Tie Line
9. When a call terminates just in the middle of “service set” access code dialing (Pre-set Dialing: before
going off-hook), the key operation until this moment goes all null and void.
10. This feature is not available for a two-way connection between a PS and an ATTCON/DESKCON.
11. When a PS attempts an OG call and it ends up in a Squelch Disconnection before connected to the self-
node/other node trunk, this feature is not activated.
12. If a Squelch Disconnection occurs just during the following state, this feature is not activated:
• A PS is placed on hold during a two-way connection with a station (including PS)
• A station (including PS) is placed on hold during a two-way connection with a PS
13. When a PS encounters a Squelch Disconnection during a two-way connection with a UCD station, this
feature is not available.
14. When this feature is activated and the forwarded party does not answer, the following occurs:
• When CALL FORWARDING - DON’T ANSWER is assigned at the forwarded party
After a certain period of no answer, the call is shifted to the destination of CALL
FORWARDING - DON’T ANSWER.
• When CALL FORWARDING - DON’T ANSWER is not assigned at the forwarded party
Recall to the Squelch PS is not made, and the forwarded party continues to ring.
15. When a call is forwarded by this feature and also is shifted to another destination, the forwarding kind to
be notified to the destination is “CALL FORWARDING PS INCOMING CALL INCOMPLETE”.
16. When this feature is activated, the LCD indication on the D
term
(forwarded party) is identical to that of
CALL FORWARDING PS INCOMING CALL INCOMPLETE.
17. When a Squelch Disconnection occurs simultaneously at both PSs in a two-way connection, this feature
is activated by neither PS.
18. The forwarding kind to be reported to MCI is “CALL FORWARDING - DON’T ANSWER”.
19. The assigned data for this feature can be backed up on the HDD/FDD of the PBX.
20. The forwarding destination of this feature is not designated by the system data.
21. This service does not support the unrestricted digital data.
22. Service conditions for two-line D
term
PS are shown below:
a.) This service can be assigned to both lines of this type PS.
b.) When a Squelch Disconnection occurs while a line is in a two-way connection and the other line
is placed on hold, this service is applied to the former line only (two-way connection line only).