Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
Page 48
NDA-24313, Issue 1
N-43 Name Display - Intra-Node Call
N-43 Name Display - Intra-Node Call
General Description
This feature allows a PS to indicate user information corresponding to the calling Physical Station Number while
engaged in a station-to-station call.
Operating Procedure
• When originating a station-to-station call:
LCD display of the calling station:
LCD display of the called station:
• When a station call has been transferred to another station by Call Forwarding - All Calls/Busy Line/Don’t
Answer/PS - Incoming Incomplete:
LCD display of the calling station:
LCD display of the called station:
Service Conditions
1. This feature is available for Series 7300 or later software.
2. User information corresponding to the Physical Station Number that can be displayed on the LCD is a
maximum of 16 digits.
3. User information is displayed on the LCD, indented to the left. The information may consist of English
alphabets, numeric characters, and most keyboard symbols.
4. When user information is 12 digits or more, the first or last part of information can be displayed by key
operation (Refer to the User Guide for the PS).
5. This service and NAME DISPLAY by Open Application Interface cannot be activated concurrently.
6. This service and NAME DISPLAY service for D
term
s can be activated concurrently.
7. Eight-digit display or 16-digit display is selectable by System Data, but cannot be used concurrently.
8. If the PS station has no name programmed for NAME DISPLAY - INTRA-NODE CALL service, the
Physical Station Number is displayed in the name field.
9. NAME DISPLAY - INTRA-NODE CALL is available for Station-to-Station Connection, Call
Forwarding - All Calls/Busy Line/Don’t Answer/PS - Incoming Incomplete, Call Waiting, and Call
Transfer.
H. TARO
DIR SPD LNR
H. TARO
DIR SPD LNR
CF: H. TARO
DIR SPD LNR
CF: M. TARO
DIR SPD LNR