Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
Page 50
NDA-24313, Issue 1
N-45 Number Sharing
N-45 Number Sharing
General Description
This feature allows the D
term
user to use a PS as a Sub Station. In this feature, the D
term
and PS are referred as Main
Station and Sub Station, respectively. The main functions of this feature are as follows:
1. Call Forwarding - All Calls to PS - When the D
term
(Main Station) user presses the feature key or dials the
access code, Call Forwarding - All Calls to PS (Sub Station) is set or cancelled. This function can also be
set or cancelled by dialing the access code from the PS (Sub Station).
2. D
term
- Telephone Number Display - Even if a call is connected to the PS (Sub Station), the telephone
number of the D
term
(Main Station) is displayed on the other party’s LCD.
3. Billing Information - Even if a call is originated from the PS (Sub Station), billing information is recorded
as a call origination from the D
term
(Main station).
4. Voice Mail Indication - Even if a call is transferred from the PS (Sub Station) to the Voice Mail System,
the voice mail is recorded on the mail box of the D
term
(Main Station). The system controls Message
Waiting Indication on both the D
term
(Main Station) and PS (Sub Station).
Operating Procedure
To set from the D
term
1. While in idle state, press the feature key for this feature. The PS Transfer lamp lights on the D
term
(Main
Station).
2. All the calls to the D
term
(Main Station) are forwarded to the PS (Sub Station).
To cancel from the D
term
1. While the Sub Station Transfer lamp lights, press the feature key for this feature. The PS Transfer lamp
goes off on the D
term
(Main Station).
2. This feature is cancelled.
To set from the PS
1. While in idle state, dial the access code for this feature and receive Service Set Tone. The PS Transfer
lamp lights on the D
term
(Main Station).
2. All the calls to the D
term
are forwarded to the PS (Sub Station).
To cancel from the PS
1. While this feature is set, dial the cancel code for this feature and receive Service Set Tone. The PS Transfer
lamp goes off on the D
term
(Main Station).
2. This feature is cancelled.
Service Conditions
1. This feature is available for Series 7300 or later software.
2. A telephone number must be assigned to both Main and Sub Stations.
3. The PS cannot be assigned as Main Station.
4. Any combination of Main Station and Sub Station is available in a FCCS network.
5. The access code for an outgoing call cannot be assigned as a telephone number of the Sub Station.
6. Dialing the access code for this feature is available only for Main Station and Sub Station. Any other
station or trunk cannot set this feature.
7. The D
term
user can set this feature using any line on the D
term
. Even if the D
term
user sets this feature using
a sub line, this feature is set to My Line.
8. The “PS Transfer” key is available only when the D
term
is in idle state.