Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1
Page 33
Overlap Dialing O-39
O-39 Overlap Dialing
General Description
This service allows the D
term
PS series user to receive a Dial Tone and to dial the desired number to originate a call.
Operating Procedure
To originate a call
1. Press the SEND or L1/L2 key; receive Dial Tone.
2. Dial the desired number. The dialed numbers are displayed on the LCD.
Service Conditions
1. A maximum 24 digits (numbers 0 to 9, #, and *) can be dialed. (A maximum of 12 digits can be displayed
on the LCD.)
2. The D
term
PS user can dial the number before hearing Dial Tone.
3. The prepause timer after receiving Dial Tone is ten seconds; and if no number is dialed within this period,
the user receives Reorder Tone.
4. If the interdigit timer expires while the user is dialing the number, the numbers dialed before the timer will
be sent out.
5. For every call origination, PS AUTHENTICATION is activated.
6. The D
term
PS-to-D
term
PS calls cannot be recorded for the SMDR.