Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1
Page 57
Call Forwarding - Dropped Calls C-161
C-161 Call Forwarding - Dropped Calls
General Description
This feature provides a call forwarding function when a PS encounters a Squelch Disconnection (such as PS moving
out of zone, failing to hand over a call, or a sudden power down of the PS) during a two-way connection with a
station/trunk. If this feature is set, the PS can forward the unexpectedly disconnected call to a pre-assigned
forwarding destination, such as a PS, a user of voice mail system, or an analog/D
term
station, etc.
Note:
This feature is available when CALL FORWARDING PS INCOMING CALL INCOMPLETE is already
assigned to the PS.
Operating Procedure
To set up this feature
1. Pre-set Dialing
a.) Dial the access code to set this feature.
b.) Go off-hook and hear the Service Set Tone.
c.) Go on-hook.
2. Overlap Dialing
a.) Go off-hook and hear the Dial Tone.
b.) Dial the access code to set this feature.
c.) Hear the Service Set Tone.
d.) Go on-hook.
To cancel this feature Note 1
1. Pre-set Dialing
a.) Dial the access code to cancel this feature.
b.) Go off-hook and hear the Service Set Tone.
Note 2
c.) Go on-hook.
2. Overlap Dialing
a.) Go off-hook and hear the Dial Tone.
b.) Dial the access code to cancel this feature.
c.) Hear the Service Set Tone.
d.) Go on-hook.
Note 1:
This feature also can be cancelled by cancelling CALL FORWARDING PS INCOMING CALL
INCOMPLETE. (Refer to Item 3 under Service Conditions.)
Note 2:
When dialing the cancel access code, which this feature has not be assigned, Reorder Tone is returned.
Service Conditions
1. This feature can be set at each PS, which is already provided with the CALL FORWARDING PS
INCOMING CALL INCOMPLETE feature.
2. The forwarding destination of CALL FORWARDING PS INCOMING CALL INCOMPLETE is also
designated as the destination of this feature.
3. This feature also can be cancelled by cancelling CALL FORWARDING PS INCOMING CALL
INCOMPLETE. However, CALL FORWARDING PS INCOMING CALL INCOMPLETE is solely
cancelled while this feature is maintained, depending on the system data.
4. After this feature is once in service, the function of this feature is still maintained, even if CALL
FORWARDING PS INCOMING CALL INCOMPLETE service is restricted.