Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1
Page 63
Authorization Code - D
term
PSII A-137
A-137 Authorization Code - D
term
PSII
General Description
An AUTHORIZATION CODE is a numerical code dialed by PS users (up to ten digits), which will override the
station CLASS OF SERVICE - INDIVIDUAL [C-15] for facility access restriction.
Operating Procedure
Procedure 1
• With feature Access Code
1. Go on-hook and receive Dial Tone.
2. Enter the feature Access Code and receive Service Set Tone.
3. Enter the AUTHORIZATION CODE (up to ten digits).
4. Receive Dial Tone.
5. Enter the number to be called.
Procedure 2 (only for LEAST COST ROUTING [L-5] calls)
• Without feature Access Code
1. Go on-hook and receive Dial Tone.
2. Enter the number to be called.
3. If an AUTHORIZATION CODE is required, the caller will receive Special Dial Tone.
4. If Special Dial Tone is received, enter the AUTHORIZATION CODE (up to ten digits) or the call is
denied.
Note:
The feature access code for AUTHORIZATION CODE is a maximum of three digits.
Service Conditions
1. Feature restriction classes of the following services cannot be overridden using this feature.
• PAD LOCK
• Authorization Code Display Elimination
2. The following are conditions when using My Line (L1) and Sub Line (L2) simultaneously. (Two-Line
Operation)
• When one line is connected and the other line is held, the class of the held line is not changed
(remains the class before changeover) and it is changed after returning to the original call.
• When both lines are held, the class changeover of earlier-held line is invalid.
3. Users cannot use the ISDN DATA COMMUNICATIONS - 32 kbps service using Authorization Code.
4. Visitor PS of “TTC Q.931a protocol Tie Line with PCS Roaming” is not available.