Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1
Page 41
PS-to-Station Calling P-66
P-66 PS-to-Station Calling
General Description
This service allows the D
term
PS series user to place a call to a PBX station, and vice versa.
Operating Procedure
To place a call using OVERLAP DIALING
1. Press the SEND or L1 key; receive Dial Tone.
2. Dial the desired number; receive Ringback Tone.
To place a call using PRESET DIALING
1. Dial the desired number, then press the SEND L1 key; receive Ringback Tone.
Service Conditions
1. The dialed digits are sent out in the following timing:
a.) when the NEAX2400 IPX recognizes the last digit according to the numbering plan
b.) if the NEAX2400 IPX cannot recognize the last digit, ten seconds after the last digit is dialed
(inter-digit timer time-out).