Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
Page 64
NDA-24313, Issue 1
C-166 Call Park - D
term
PSII
C-166 Call Park - D
term
PSII
General Description
This feature enables a PS user to “Park” a call (C.O. line, Tie Line, station and PS) by hooking and dialing a Call
Park Access Code, and by dialing the Call Park retrieval code and the telephone number that parked a call, the parked
call can easily be retrieved from any PS/Station within the system. If the user forgets to retrieve the parked call, the
automatic recall function informs the user.
Operating Procedure
To park a call from PS
1. Go hooking (press TRF key).
2. Receive Special Dial Tone.
3. Dial the Call Park Access Code.
4. Receive Service Set Tone.
5. Replace the handset.
To retrieve a parked call from the originating station
• Overlap sending procedure
1. Go off-hook.
2. Receive a Dial Tone.
3. Dial the Call Park local retrieval code.
4. The parked call is reconnected.
• Enbloc sending procedure
1. Dial the Call Park local retrieval code.
2. Go off-hook.
3. The parked call is reconnected.
To retrieve a parked call from a different station
• Overlap sending procedure
1. Go off-hook.
2. Receive Dial Tone.
3. Dial the Call Park remote retrieval code and the number of the station that parked the call.
4. The parked call is reconnected.
• Enbloc sending procedure:
When access code operation using enbloc sending is invalid
1. Dial the Call Park remote retrieval code.
2. Go off-hook.
3. Dial the number of the station that parked the call.
4. The parked call is reconnected.
When access code operation using enbloc sending is valid:
1. Dial the Call Park remote retrieval code and the number of the station that parked the call.
2. Go off-hook.
3. The parked call is reconnected.