Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
Page 24
NDA-24313, Issue 1
General Service Features
Note 1:
Automated Attendant: Terminating side is PS
• When the PS is Out of Zone (Out of Area or in POWER OFF state), the calling party encounters
Busy Tone, but call termination is not retried.
If the AUTOMATIC ANNOUNCEMENT - CALLED PS OUT OF ZONE [A-129] is set to the PS,
the calling party does not hear Out of Zone Announcement. The calling party hears Busy Tone, but
is not allowed to try a call termination again.
• If a PS user moves Out of Zone while talking with a subscriber of the Central Office line,
AUTOMATIC ANNOUNCEMENT - DISCONNECTED PS OUT OF ZONE [A-128] cannot be
heard by the subscriber outside. Busy Tone is heard.
• When a call activated by AUTOMATED ATTENDANT is transferred to a certain PS or a station to
which CALL FORWARDING PS INCOMING CALL IMCOMPLETE [C-155] is set and when the
transferred party is Out of Zone or in lock-out state, the calling party hears Busy Tone.
• PS is not allowed to be handed over while ringing. When the called PS is ringing with
AUTOMATED ATTENDANT in service and at the same time, its transceiver zone is switched over,
the PS stops ringing and the calling party hears Busy Tone.
Note 2:
This feature is not applicable using CALL TRANSFER - ALL CALLS [C-11].
Note 3:
If the Attendant Console which received a call from a Central Office line is released while calling a PS,
the caller changes to the Central Office line side.
If, in this situation, the PS user moves to a place out of Zone, the caller from the Central Office line
continues hearing Busy Tone.
Note 4:
Call Waiting:
• This service is valid in a two-party call when call is terminated - from station-to-station, to PS, to
Central Office line, or to Tie Line call - but invalid when other services using switch hook flash are
executed to the PS or when the PS is connected to the Attendant Console.
• To set CALL WAITING, it is necessary that the Service Restriction Class data be assigned in the
office data assignment. Call Waiting service is provided according to each service feature
restriction class.
• There are no limitations to the number of CALL WAITING services such as the number of
simultaneous settings/the number of occurrence of answers.
V-1Variable Timing Parameters ————————
V-18Virtual Tie Line ————————
V-2Voice Call ————————
V-2D Voice Call - D
term
————————
V-7 Voice Call - CCIS — — — — — — — —
V-3D Volume Control - D
term
————————
W-1 WATS Access X — — — → ———
Index Feature Name
Series 7300 Series 7400
Stand Alone FCCS Stand Alone FCCS
Fm To Fm To Fm To Fm To
Fm: When the call is originated from PS To: When the call terminates to PS
X: Available —: Not available
X*: Available with limitations