Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1
Page 49
Name Display - Intra-Node Call - CCIS N-44
N-44 Name Display - Intra-Node Call - CCIS
General Description
Between CCIS nodes this feature allows the calling or called party information to be displayed on the LCD of a PS.
Operating Procedure
• When originating a call:
LCD display of the calling station:
LCD display of the called station:
• When a call has been transferred to another station by CALL FORWARDING - ALL CALLS/BUSY LINE/
DON’T ANSWER/PS - INCOMING INCOMPLETE:
LCD display of the calling station:
LCD display of the called station:
Service Conditions
1. This feature is available for Series 7300 or later software.
2. User information corresponding to the Physical Station Number that can be displayed on the LCD is a
maximum of 16 digits.
3. User information is displayed on the LCD, indented to the left. The information may consist of upper case
letters, numeric characters, and most keyboard symbols.
4. When user information is 12 digits or more, the first or last part of information can be displayed by key
operation (Refer to the User Guide of PS).
5. This service and NAME DISPLAY by Open Application Interface cannot be activated concurrently.
6. This service and NAME DISPLAY service for D
term
s can be activated concurrently.
7. Eight-digit display or 16-digit display is selectable by System Data, but cannot be used concurrently.
8. If the PS station has no name programmed for NAME DISPLAY - INTRA-NODE CALL - CCIS service,
“Office Code + Physical Station Number” is displayed in the name field.
9. NAME DISPLAY - INTRA-NODE CALL - CCIS is available for Tie Line Connection, Call Forwarding
- All Calls/Busy Line/Don’t Answer/PS - Incoming Incomplete, Call Waiting, and Call Transfer.
H. TARO
DIR SPD LNR
H. TARO
DIR SPD LNR
H. TARO
DIR SPD LNR
CF: M. TARO
DIR SPD LNR