Filter
Top Products
NEAX2400 IPX Wireless Features and Specifications
NDA-24313, Issue 1
Page 35
Individual PS Calling I-39
I-39 Individual PS Calling
General Description
This service allows the calling party to call the individual D
term
PS series.
Operating Procedure
1. Dial the unique number assigned to each D
term
PS; the designated D
term
PS will be called. If the calling
number display is available, the lower 12 digits of the number are displayed on the LCD of the called D
term
PS. (The arrow is displayed to show that the upper digits are not displayed.)
2. There are two answering options:
a.) Any-key answering mode
The called D
term
PS user presses any one of the keys (numbers 0 to 9, #, *, or function keys) to
answer.
b.) Automatic answering mode
The called D
term
PS is connected automatically without ringing.
Service Conditions
1. The D
term
PS will be called in the calling area where its location had been registered.
2. If the D
term
PS cannot be called as when the D
term
PS user is out of the service area, an announcement can
be provided to the calling party. (The DAT package is required for the caller and called node.) If the called
D
term
PS is out of the service area, OUT OF CELL INDICATION is activated.
3. When all the speech channels of the zone transceiver in the Calling Area are busy, either
ANNOUNCEMENT - PS OUT OF CELL or CALL FORWARDING - PS OUT OF CELL is activated, if
allowed in the D
term
PS service feature class. If not allowed in the service feature class, the D
term
PS user
receives Reorder Tone.
4. PS AUTHENTICATION is activated for every call termination.
5. The answering options, the any-key answering mode and the automatic answering mode can be selected
by the D
term
PS user using the FNC key.