Installation and Removal of Software on the Computers 77
• the port number using which the Network Agent will connect to
the Administration Server. By default port 14000 will be used. If
it has been assigned, you can change it. Only decimal repre-
sentation is allowed.
• port number that will be used for secure connection to the
Administration Server using SSL protocol. By default port 13000
port is used. If it has been assigned, you can change it. Only
decimal representation is allowed. In order to make sure that
the connection is using a secured port (using SSL protocol)
check the Use SSL to connect to server box.
Figure 50. Configuring settings used to connect to the Administration Server
5. If the Network Agent connects to the Server via a proxy server (see
Figure 51)l, configure the corresponding connection settings:
• Check the Use a proxy server to connect to the Administra-
tion Kit Server box and enter the address and the name of the
port to connect to the proxy server. Only decimal notation is al-
lows (for example: Proxy address: proxy.test.com; Port: 8080).
• If a password is used to access the proxy server, fill in the
Proxy login and the Proxy password fields.
If no proxy server is used, skip this step by pressing the Next button.
