A SERVICE OF

logo

Installing External System Devices
HP NonStop S-Series Hardware Installation and FastPath Guide—541880-001
7-5
Installing a 5175 Open-Reel Tape Subsystem
7. On the pedestal, lower the legs, which are located next to each caster:
a. Turn each leg counterclockwise with your fingers until it touches the floor.
b. With a 15/16 inch (24 mm) wrench, turn the nut until the pad rests firmly on the
floor.
Figure 7-3. Removing the Shipping Restraints From a 5175 Tape Subsystem
Front Panel
Back
Panel
Shipping Restraint
VST019.vsd
Shipping Restraint