Filter
Top Products
11
US
Shutting down the PlayStation
®
2 console
To shut down a PlayStation
®
2 console with an HDD unit installed, check that the
1 indicator on the console front is lit up in red to indicate that the console is in
standby mode. Then, press the MAIN POWER switch on the console rear.
Caution
• Do not turn off the PlayStation®2 console using the MAIN POWER switch on the
console rear without following this procedure. Doing so may cause software or data
loss or corruption, or damage to the HDD.
• Before following the procedure, check that the HDD access indicator located inside the
front vent of the PlayStation®2 console is not blinking.