Filter
Top Products
32
Re-installing the HDD software
You can re-install the HDD software (HDD compatible browser, additional system
configuration settings and CD Player software), if the HDD compatible browser fails
to start.
The Install HDD Software utility will not delete or change data or PlayStation
®2
format software stored on the HDD. Note that each time the HDD software is
installed on the HDD, the “Keyboard” and “Mouse” settings in the System
Configuration menu will return to their original values.
1 Start HDD Utility Disc (ver 1.10).
The opening screen will appear. Then, after several seconds, the Basic Operations
screen will appear.
2 At the Basic Operations screen, press the × (Enter) button.
The Utilities menu will appear.
3 Select “Install HDD Software,” and then press the × button.
4 Proceed with the utility according to the on-screen instructions.
The current status will appear on the screen while the utility is in use.
When the installation is completed, remove HDD Utility Disc (ver 1.10), and store
it in a safe place for future use.
Notes
• Check that the HDD unit is properly installed in your PlayStation®2 console. If the HDD unit
is not properly installed, the software installation could fail, resulting in damage to the
contents of the HDD.
• To help prevent software or data loss or corruption during installation:
– do not open the disc tray
– do not turn off the PlayStation®2 console, or press the 1 (standby)/RESET button
– do not remove the HDD unit from the console.