Filter
Top Products
78
www.seuservice.com
79
www.seuservice.com
FIG. 17
Move the Seat to the rearmost position and apply
spray greasing to the portion shown at the right
once every 3 months by using NOK KLUBER L60
or GREASE MATE SEGA PART No. 090-0066.
After greasing, move the Seat a few times forward
and backward so as to allow the grease to be
applied all over uniformly. Be sure to wipe grease
which attaches to the surfaces of the PROTECT
RUBBER on the Seat Rail, or any excess grease.
SEAT (Greasing to Seat Rail Portion)
CLEANING THE CABINET SURFACES
When the cabinet surfaces are badly soiled, remove stains with a soft cloth dipped in water or
diluted (with water) chemical detergent and squeezed dry. To avoid damaging surface nish, do
not use such solvents as thinner, benzine, etc. other than ethyl alcohol, or abrasives, bleaching
agent and chemical dustcloth.