Filter
Top Products
66
www.seuservice.com
67
www.seuservice.com
11-3 GREASING
Use spray grease once every three months to grease up the gear mesh portion of the constituent
parts.
Use "Grease Mate" (part number 090-0066) for the spray grease.
FIG. 11. 3
Grease is inammable and must never be close to re.
Grease may be apt to be erroneously used or drunk, and must not be placed in
a location where children can access.
Grease does harm to your body if you aspirate it. Do not perform any work
related to grease in a location where ventilation is insufcient.
If grease enters an eye, eye irritation may be caused. Take care to prevent it
from entering your eyes (for example, by wearing protective goggles).
Should grease enter an eye, rinse it in clean water and have your illness
diagnosed by a doctor.
If grease touches a human skin, skin irritation may be caused. Take care to
prevent grease from touching your skin (for example, by wearing protective
gloves).
Should grease touch your skin, fully wash it using water and soap.
Be sure to use the designated type of grease. If a non-designated type grease is
used, components may break.
The period for greasing specied herein is a standard. Apply greasing to the
specied portions as occasion arises.
CAUTION!
STOP
IMPORTANT!
WARNING!