Filter
Top Products
42
www.seuservice.com
43
www.seuservice.com
10. EXPLANATION OF TEST AND DATA DISPLAY
By operating the switch unit, periodically perform the tests and data check. When installing the
machine initially or collecting cash, or when the machine does not function correctly, perform
checking in accordance with the explanations given in this section.
The following shows tests and modes that should be utilized as applicable.
This product's basic system consists of the NAOMI 2 GD-ROM game board. The system
enables you to play several games one after the other just by changing a GD-ROM disc and key
chip.
The product supports, therefore, the following 2 test modes:
(1) System test mode for an automatic self-diagnostic test (generally used by every product that
contains the basic system) and a coin assignment (specically used by this product) and
(2) Game test mode for testing the input/output control devices and setting the difculty level
(specically used by this product).
This manual does not cover the automatic self-diagnostic test. For more information about the
system test mode, see the attached NAOMI NETWORK SYSTEM Service Manual.
NETWORK SYSTEM SERVICE MANUAL
10-3F,H
10-3B
10-3C
NETWORK SYSTEM SERVICE MANUAL
NETWORK SYSTEM SERVICE MANUAL
NETWORK SYSTEM SERVICE MANUAL
10-3F,H
10-3B
10-3C
10-3G
NETWORK SYSTEM SERVICE MANUAL
10-3B,D,E
11,12,13
NETWORK SYSTEM SERVICE MANUAL
15
NETWORK SYSTEM SERVICE MANUAL
NETWORK SYSTEM SERVICE MANUAL
10-3F,I
TABLE 10 EXPLANATION OF TEST MODE
ITEMS DESCRIPTION
INSTALLATION
OF MACHINE
MEMORY
PERIODIC
SERVICING
CONTROL
SYSTEM
MONITOR
IC BOARD
DATA CHECK
When the machine is installed, perform the following:
1. Check to ensure each is the standard setting at shipment.
2. Check each Input equipment in the INPUT TEST mode.
3. Check each Output equipment in the OUTPUT TEST mode.
4. Test on-IC-Board IC's in the SELF-TEST mode.
This test is automatically executed by selecting RAM TEST, or
ROM BOARD TEST in the Menu mode.
Periodically perform the following:
1. MEMORY TEST
2. Ascertain each setting.
3. To test each Input equipment in the INPUT TEST mode.
4. To test each Output equipment in the OUTPUT TEST mode.
5. CARD R/W TEST
1. To check each Input equipment in the INPUT TEST mode.
2. Adjust or replace each Input equipment.
3. If the problem still remains unsolved, check each equipment's
mechanism movements.
In the Monitor Adjustment mode, check to see if Monitor (Projec-
tor) adjustments are appropriate.
MEMORY TEST
Check such data as game play time and histogram to adjust the
difculty level, etc.
REFERENCE
SECTIONS