Omron master control units Video Game Controller User Manual


 
4-2SectionProgramming Console Operations
49
2. Input the address of the first bit or word and press the MONTR Key.
TIM
MONTR
T000
0100
3. Repeat step 2 up to 6 times to display the next addresses to be monitored.
SHIFT
CONT
#
B
1
MONTR
00001 T000
^ OFF 0100
DM
EM
MONTR
D000000001 T000
0000^ 0FF 0100
If 4 or more bits and words are being monitored, the bits and words that do
not appear on the display can be displayed by pressing the MONTR Key. If
the MONTR Key is pressed alone, the display will shift to the right.
If more than six bits and words are input, monitoring of the bit or word input
first will be canceled.
4. Press the CLR Key to stop monitoring the leftmost bit or word and clear it
from the display.
CLR
00001 T000
^ 0FF 0100
5. Press the SHIFT+CLR Keys to end monitoring altogether.
SHIFT CLR
00000
CONT 00001
Note Press the SHIFT + CLR Keys to return to the display with the multiple address
monitoring state unchanged. Press the SHIFT + MONTR Keys to display the re-
tained multiple address monitoring state. The monitoring states can be retained
for 6 bits and words.
4-2-14 Differentiation Monitor
This operation is used to monitor the up or down differentiation status of a
particular bit. When detected, the up or down differentiation will be displayed
and the buzzer will sound. It is possible in any mode.
RUN MONITOR PROGRAM
OK OK OK
1, 2, 3... 1. Monitor the status of the desired bit according to the procedure described in
4-2-13 Bit, Digit, Word Monitor. If 2 or more bits are being monitored, the de-
sired bit should be leftmost on the display.
In this case the differentiation status of LR 00 will be monitored.
L0000āāā00001āāāH0000
^ OFFāāā^ OFFāāā^ OFF
2. To specify up-differentiation monitoring, press the SHIFT and then the Up
Arrow Key. The symbols U@ will appear.
SHIFT
L000000001H0000
U@OFF^ OFF^ OFF
Indicates waiting for the bit to turn ON.
To specify down-differentiation monitoring, press the SHIFT and then the
Down Arrow Key. The symbols D@ will appear.
SHIFT
L0000āāā00001āāāH0000
D@OFF^ OFF ^ OFF