A SERVICE OF

logo

Open as PDF
next previous
MEDIA HINTS AND TIPS
668
1 For each endcap:
Align the tabs (a) on the inside of the
adapter with the “V”-shaped openings
(b) on the endcap’s core. The 4 teeth (c)
of the adapter fit over the endcap’s core.
Slide the adapter onto the endcap and
push until it snaps into place.
2 Load the media roll as you would normally:
■ Slide the media roll onto the shaft, so that the fixed endcap fits inside
the core of the media roll.
■ Replace the removable endcap.
9480-132
a
b
c