SYMPTOMS AND SOLUTIONS
608
If you can’t print
from Windows to
an LPT port
(cont’d.)
Check the printer’s language mode
1. Print a copy of the printer’s configuration page to see the language mode
on each port. Refer to Pr
inting the configuration page.
2. If the printer port you are using has the wrong language set for the type of
application you are using, send one of the following utility files to the printer:
■ To print PostScript files, use the
PSCRIPT.PS
file to set up a port to receive
PostScript; see Pr
inting PostScript files or World Wide Web for details.
■ To print HP-GL files, use the
HPGL.PS
file to set up a port to receive HP-GL;
see Pr
inting HP-GL files or World Wide Web for details.
■ To print PostScript or HP-GL files, use the AIS.PS file to set up a port for
automatic language selection; see Enab
ling automatic language selection or
World Wide Web.
If you can’t make a print (cont'd.)
Symptom Solution
