A SERVICE OF

logo

SETTING UP THE PRINTER
26
Attaching the output bin
1 Remove the output bin
from its packing box.
Also remove the small
plastic bag that contains
two bolts and an Allen
wrench.
2 With the output bin
folded at its joint, hook
the short end (a) over
the back (upright) rail
(b) of the printer.
3 Align the openings of
the long end of the
output bin with the
openings in the front
legs of the printer. Insert
a bolt into the opening on
each front leg; tighten them with the Allen wrench.
b
a
3
2
9480-124