DOWNLOADING FILES TO THE PRINTER
435
1 See Installing the Macintosh utility files from the printer’s CD-ROM to install the
printer’s software.
2 Select the appropriate printer in the Chooser.
3 Locate the
LaserWriter Utility
in the
PhaserTools
folder on your hard disk, and
double-click its icon to start the application.
4 Select Download PostScript File from the Utilities menu.
5 Select the file you want sent to the printer, and click Open. (The printer’s utility
files were installed in the
Printer Utilities
folder, inside the
PhaserTools
folder.)
6 At the prompt Save PostScript output as: you are asked for a file name
for saving printer output. Use the default name given in the edit box or type in
a new name. (Printer output includes status messages generated by the
printer reporting such conditions as out of paper.)
7 Click Save to send the file to the printer.
8 If no output is returned by the printer, the
LaserWriter Utility
displays a dialog
box; click OK in the box to continue.
If output is returned by the printer, you won't see this dialog box; check your
hard disk for the file the utility created for the printer's output.
