A SERVICE OF

logo

REPACKING AND MOVING THE PRINTER
579
Repack the printer
1 Re-insert these shipping restraints:
a Transit restraint for the printhead.
b Shipping blocks for the fuser.
c Shipping block for the top cover latch.
2 Close all doors and secure them with adhesive tape.
3 Retract the leveling legs under the printer; this allows clearance for the printer
to move freely on its wheels.
4 Unlock the front casters (push the locking lever to the
up
position.
5 Attach the pallet ramps to the pallet (refer to the
Phaser 600 Repacking
Instructions
).
6 Carefully guide the printer onto the pallet.