Tektronix Phaser 600 Manual

A SERVICE OF

next previous

CHANGING THE PRINTER’S LANGUAGE MODE

526

Enabling automatic language selection

Use the

AIS.PS

ﬁle to change a port to automatic language selection. After you

copy this ﬁle to a port, the printer accepts PostScript or HP-GL ﬁles on that port.

The port’s language change is persistent across print jobs and across printer power

cycles. To use automatic language selection, send the

AIS.PS

ﬁle to the printer.

1 Locate the utility ﬁles on the Phaser 600 printer’s CD-ROM; refer to Installing

the ﬁles for instructions.

2 Use one of the following methods to send the

AIS.PS

ﬁle to the printer:

■ PC users: Use the DOS COPY command to send the ﬁle to the printer.

(Windows 3.1 users can also use the Copy command in the File

Manager.)

■ Workstation users: Send the ﬁle to a printer as you would any

PostScript ﬁle.