SPECIAL PRINTING FEATURES
223
Hints
■ When Hot is selected, the only available option for Advance Media is
Allow Hot Fusing. Refer to Adv
ance Media for more information.
■ Media fusing behaves differently with different media types (some media
may produce degraded print quality with fusing). Experiment until you get
the best results. Tektronix-supplied media usually look best with
cold-fusing.
■ When hot fusing is selected (or de-selected), the printer goes into a
warm-up (or cool-down) period for approximately 15 minutes. If hot fusing
has been selected, the printer’s warm-up time also increases when the
printer is turned on or comes out of standby mode.
■ If you do not have a supported printer driver, you can use the PostScript
utility files shipped on the printer’s CD-ROM or diskettes. Refer to
Do
wnloading files to the printer for instructions on downloading utility files.
