A SERVICE OF

logo

BI -DIRECTIONAL STATUS REPORTING
509
NOTE
The printer is shipped with the uni-directional mode enabled.
1 Follow the instructions in PC/Windows software to install the printer’s software.
Select Easy Install to automatically install the software, or select the
Printer
Utilities
item in the Custom Install: Utilities window.
2 Locate the files in the
PHSR600
subdirectory, inside the
PHSRTOOL
directory
created on your hard disk by the installer application.
3 Select one of the following files.
Use the
BIDIR.PS
file to enable bi-directional status reporting on a
parallel port.
Use the
UNIDIR.PS
file to disable bi-directional status reporting.
4 Use one of the following methods to send the desired file to the printer:
PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
Workstation users: Send the file to the printer as you would any
PostScript file.