CONNECTING THE PRINTER
32
Adjust the leveling legs and lock the wheels
It is very important that the printer be set up
on a level, secure surface for the best print
quality.
1 Remove the adhesive tape that protects
the leveling legs and the bottom of the
printer.
2 To adjust the four leveling legs under
the printer, use a small, adjustable
wrench to turn the nut on each leg to the
desired height. If the floor is a smooth,
non-carpeted surface, the leveling legs
keep the printer from sliding.
3 Lock the front casters by pressing down
on the locking lever. If the floor is a
carpeted surface, the casters alone
keep the printer steady.
9480-128
1
9480-43
2
3
