A SERVICE OF

logo

CHANGING THE PRINTERS LANGUAGE MODE
525
Printing HP-GL files
Use the
HPGL.PS
file to change a printer’s port to accept
only
HP-GL data. After
you copy this file to a port, the printer expects HP-GL files on that port. The port’s
language change is persistent across print jobs and across printer power cycles.
To use, send the
HPGL.PS
file to the printer.
1 Locate the utility files on the Phaser 600 printer’s CD-ROM; refer to Installing
the files for instructions.
2 Use one of the following methods to send the
HPGL.PS
file to the printer:
PC users: Use the DOS COPY command to send the file to the printer.
(Windows 3.1 users can also use the Copy command in the File
Manager.)
Workstation users: Send the file to a printer as you would any
PostScript file.