A SERVICE OF

logo

PRINTED COLORS ARE NOT WHAT YOU EXPECTED
649
Using the PC/workstation Setscreen utility file
1 Follow the instructions in PC/Windows software to install the utility files from
either the Phaser 600 CD-ROM or the Printer Software for Windows diskette.
2 Locate the installed files in the
PHSR600
subdirectory, inside the
PHSRTOOL
directory on your hard disk.
3 Use one of the following files:
Select
SCREENON.PS
to enable setscreen operations.
Select
SCRENOFF.PS
to disable setscreen operations.
4 Use one of the following methods to send a file to the printer:
PC users: Use the DOS COPY command, or the Copy command in
Windows 3.1 File Manager, to send the file to the printer.
Workstation users: Send the file to the printer as you would any
PostScript file.