Filter
Top Products
67 www.seuservice.com
FIG. 16
CLEANING THE CABINET SURFACES
If the Cabinet is badly stained, use a cloth which is dipped in the chemical detergent liquid
diluted with water and then squeezed dry. Do not use such solvents as alcohol, thinner, benzine,
etc., or abrasives, bleaching agents and or chemical dustcloth as these can damage cabinet
surface finish.
Move the Seat to the rearmost portion and apply spray greasing to the portion shown at the right
once every 3 months by using NOK KLUBER L60 or GREASE MATE SEGA PART No.
090-0066.
After greasing, move the Seat a few times forward and backward so as to allow the grease to be
applied all over uniformly. Be sure to wipe grease which attaches to the surfaces of the
PROTECT RUBBER on the Seat Rail, or any excess grease.
REAR CABINET (Greasing to Seat Rail Portion)