Filter
Top Products
38www.seuservice.com
10 - 2 REPLACING THE SWITCH
In case 6-speed Shift operability is poor, malfunction of or damage to the Microswitch of
Mechanism can be considered. The 6-speed Shift has 4 Microswitches. Be sure to check which
Switch malfunctions prior to performing work.
Remove 6-speed Shift as per
procedure 10-1.
Disconnect the wiring connected to
the Microswitch.
Take out 2 screws to replace the
Microswitch.
Adjust Microswitch's actuator to
an angular position so as not to
touch the Switch when operating
the Shift Lever.
Fasten 2 screws to secure the
Microswitch.
Check to ensure that the Switch
goes ON and OFF in consistency
with the operation.
SCREW (2)
M2.3 X 10,w/flat & spring washers
MICROSWITCH
509-5636
SCREW (2)
M2.3 X 10,w/flat & spring washers
MICROSWITCH
509-5636
PHOTO 10. 2 a
PHOTO 10. 2 b
1
2
3
4
5
6