Filter
Top Products
62www.seuservice.com
Remove the Corner Plate. When it
is hard to remove the Corner Plate,
loosen the 5 screws which secure
the Corner Light Lid.
CORNER PLATE
PHOTO15 e
Take out 2 screws which secure
the Bracket of connector side of
the Slim lamp.
Disconnect the connector and
replace the Slim lamp.
Insert the edge of the replacing
Slim lamp in to the holder.
Pass the plastic made bush and
spacer through the 2 screws which
secure the Bracket of the connector
side. Install in a manner to put the
installation portion between the
bush and the spacer.
SLIM LAMP
390-6651
FIG. 15 c
CONNECTOR
SPACER
BUSH
TRUSS SCREW (2)
M4 X 12,flat washer used.
CORNER LIGHT LID
6
7
8
9
10