Filter
Top Products
33 www.seuservice.com
VR BASE
SCREW(2)
M4 X 12,w/flat & spring washers
FIG. 9. 1 b
Turn on power.
Set the Center Value of the Volume in the TEST mode.
In the TEST mode, check to see if the Volume Value varies smoothly in accordance with the
steering wheel operation.
After replacing the Volume, engage the gears at the angular position shown and fix the VR
Bracket.
V.R.
220-5484
220-5373
9 - 2 GREASING
Apply greasing to gear
mesh portions once every
3 months.
Use GREASE MATE
(SEGA PART NO.
090-0066).
VOLUME GEAR MESH PORTION
PHOTO 9. 2
STOP
IMPORTANT!
Be sure to use the designated grease. Using undesignated grease can cause
parts damage.
Do not apply greasing to undesignated places. Failure to observe this can cause
malfunctioning or quality deterioration of parts.
5
6
7
8