Filter
Top Products
17 www.seuservice.com
Perform wiring for the Power Cord and Earth Wire. Install protective covering for the Power
Cord and Earth Wire.
Connect the Earth Wire
to the Earth Terminal.
FIG. 6. 4 b Earth Wire Connection
Connect one end of the earth wire to the AC Unit
earth terminal, and the other end to the indoor earth
terminal. The AC Unit earth terminal has a Bolt
and Nut combination. Take off the Nut, pass the
end of earth wire through the Bolt, and fasten the
Nut.
Note that the Earth Wire is incorporated in the
Power Cord for the Areas of AC 120V (USA) and
AC 220Å`240V, and therefore, this procedure is
not necessary.
Firmly insert the power plug into the socket outlet.
Insert the opposite side of Power Cord plug to the
AC Unit's connector ("INLET").
FIG. 6. 4 c Connecting Power Cord and Earth Wire
Wiring Cover
In case the Power Plug is apt to come out of place, secure the
Power Cord to the periphery of the AC Unit with the Cord
Clamp (an accessory).
HOW TO USE THE CORD CLAMP
2
3
4