Filter
Top Products
27 www.seuservice.com
In the case the cabinet is
separated into the front and
rear portions, do not push the
upper rear part of the front
cabinet.
When moving the machine, be sure to unplug the power plug. Moving the
machine with the plug as is inserted can damage the power cord and cause fire
and electric shock hazards.
When moving the machine on the floor, retract the Adjusters and ensure that
Casters make contact with the floor. During transportation, pay careful
attention so that Casters do not tread power cords and earth wires. Damaging
the power cords can cause electric shock and short circuit hazards.
When lifting the cabinet, be sure to hold the grip portions or bottom part.
Lifting the cabinet by holding other portions can damage parts and installation
portions due to the empty weight of the cabinet, and cause personal injury.
In the case the cabinet is separated into the front and rear portions, do not
push the upper rear part of the front cabinet. Failure to observe this causes the
front cabinet to fall down towards the monitor side and result in accidents and
injury to persons. When moving the front cabinet in the above case, be sure to
push it from side directions and move it by 2 or more persons for safety.
Do not insert the fork to places other than designated when using a Forklift to
transport the machine.
Failure to observe this could cause falling down and injury resulting from
falling down.
8.
PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
When transporting the product in places with steps, disassemble into each unit
before transporting. Inclining the product in an as is assembled condition or
placing the cabinet in places with steps can damage the unit's joining portions.
To protect surface, do not directly apply a rope to the surfaces of product.
Use protective materials to the places the rope is applied to.
STOP
IMPORTANT!
FIG. 8 a
Do not push glass-made or plastic parts. Failure to observe this may damage parts
and cause injury due to fragments resulting from damage.