Filter
Top Products
10www.seuservice.com
Perform assembly work by following the procedure herein stated. Failing to
comply with the instructions can cause electric shock hazard.
Perform assembling as per this manual. Since this is a complex machine,
erroneous assembling can cause an electric shock, machine damage and or not
functioning as per specified performance.
When assembling, be sure to use plural persons. Depending on the assembly
work, there are some cases in which working by one person alone can cause
personal injury or parts damage.
Ensure that connectors are accurately connected. Incomplete connections can
cause electric shock hazard.
Be careful so as not to damage wirings. Damaged wiring can cause electric
shock and short circuit hazards.
In the case the cabinet is separated into the front and rear portions, do not
push the upper rear part of the front cabinet. Failure to observe this causes the
front cabinet to fall down towards the monitor side and result in accidents and
injury to persons. When moving the front cabinet in the above case, be sure to
push it from side directions and move it by 2 or more persons for safety.
This work should be performed by the Location's Maintenance Man or
Serviceman. Performing work by non-technical personnel can cause a severe
accident such as electric shock. Failing to comply with this instruction can
cause a severe accident such as electric shock to the player during operation.
Provide sufficient space so that assembling can be performed. Performing
work in places with narrow space or low ceiling may cause an accident and
assembly work to be difficult.
6. ASSEMBLING AND INSTALLATION
When handling plastic parts, use care. Do not give a shock or apply excessive
load to the fluorescent lamps and plastic parts. Failure to observe this can cause
parts damage, resulting in injury due to fragments, cracks and broken pieces.