Filter
Top Products
26www.seuservice.com
FIG. 7. 4 b
FIG. 7. 4 a
Head Up Lever
Auto Cutter
Cutter Lever
7 - 4 COUNTERMEASURES AGAINST PAPER JAM
Prepare a Master Key and scissors or a knife for eliminating the warped, wrinkled paper due to
paper jam. To perform the following work, turning off power is necessary for 2 reasons. One is
that performing work on the energized Cabinet may cause hands and fingers to be injured due to
unexpected move of the cutter or the motor. To avoid such an unforeseen accident, be sure to
turn off power before performing work. The other reason is that in order to remove the cause of
error from the Printer, turning power off is necessary. Be sure to remove the cause of error to
make the Printer function properly.
Turn off power.
Unlock with the Master Key and
remove the Printer Door.
Draw the ASSY Printer toward
you.
Pull up the Head Up Lever.
Push down the Cutter Lever and
open the Auto Cutter.
Remove the jammed paper.
Eliminate the warped, wrinkled
paper due to the paper jam. At this
time, after eliminating the paper,
any portion can come to the tip as
the Printer automatically adjusts
the Paper position by feeding and
cutting the Paper.
Lift the Auto Cutter and lock.
Insert the paper tip in to the roll paper insertion slot. Feed the Roll Paper tip through the exit
slot straight by hand until the paper tip can be seen from the exit slot.
Pull up the Head Up Lever.
Turn on power. The Printer performs automatic feeding (AUTO LOADING) and cutting of the
paper.
Put the ASSY Printer and lock the printer door to secure.
1
2
3
4
5
6
7
8
9
10
11
12