Filter
Top Products
43
www.seuservice.com
PROBLEMS CAUSE COUNTERMEASURES
Adjust the SWITCH UNIT's sound adjustment volume
control. (See Service Manual)
Perform SOUND TEST. (See Service Manual)
Firmly insert the plug into the outlet.
Make sure that the power supply/voltage are correct.
Perform head cleaning. (See Service Manual)
Replace the fluorescent lamp. (See Section 12)
Replace the lamp. (See Section 12)
Sound volume adjustment is not
correct.
Malfunctioning BD. and Amp.
The power is not ON.
Incorrect power source/voltage.
The card reader/writer head is dirty.
Fluorescent lamp need replacement.
Lamp need replacement.
TABLE 14 b
Sound is not
emitted.
When the
power SW of
the satellite is
turned ON, the
satellite is not
activated.
Printing on
cards is too
light.
Fluorescent
lamp doesn't
light up.
Lamp doesn't
light up.
● In case fuse replacements other than those stated in this manual are necessary, con-
tact where you purchased the product from for inquiries regarding this matter.
● Fuse replacements other than those specified can cause accidents and are strictly
forbidden.
● In order to prevent an electric shock, be sure to turn power off and unplug from the
socket outlet before performing work by touching the internal parts of the product.
● Be careful so as not to damage wirings. Damaged wiring can cause electric shock
and short circuit accidents.
● Be sure to use fuses meeting specified rating. Using fuses exceeding the specified
rating can cause fire and electric shock accidents.
● After eliminating the cause of the blowing of fuse, replace the fuse. Depending on
the cause of fuse blowing, continued use with the fuse as is blown can cause genera-
tion of heat and fire hazard.
FUSE REPLACEMENT
WARNING!
Fuse 250V 10A